Skip to main content

Printing on macOS

Before setting up your printers, please review the overview of Printing at ICERM.

The following instructions assume you are connected to the Brown University network via wireless (Brown, Brown-Guest, or eduroam).

Setup Instructions

These photos are for OS Monterey and before. If your computer is currently running Ventura, System Preferences will look a bit different. For steps 1 & 2, Look for "Printers & Scanners" in the left menu bar of System Preferences. Then click "Add Printer, Scanner, of Fax..." Steps 3 - 6 will be the same.  

1. Open System preferences ( Menu > System Preferences) and click on the “Printers & Scanners” tab.

image-1636554681201.png

2. Below the list of printers on the left, click the [+] button and select “Add a printer or scanner” to add a printer.

image-1636554685684.png

3. In the add printer dialog that opens, click the “IP” tab and enter the printer’s hostname for the printer you wish to add, and select Line Printer Daemon – LPD in the protocol dropdown.

  • 11th Floor Copier: icerm-im3500.devices.brown.edu
  • 10th Floor LaserJet A: icerm-ljem610a.devices.brown.edu
  • 10th Floor LaserJet B: icerm-ljem610b.devices.brown.edu


4. The system should then detect the printer and automatically fill the Name and Use fields at the bottom of the add printer window. If it does not, name the printer, select “Generic PostScript Printer” in the Use dropdown, then click Add.

5. A settings options window may appear. Select “duplex printing” and save.

image-1636554703691.png

6. The printer should be configured and ready to use. Print a test page to verify.

If you have questions about these instructions or require further assistance, please contact the ICERM IT staff by dropping by the administrative offices or emailing support@icerm.brown.edu.

Back to top